New Items

MARKCHEM WALL PUTTY is a specially blended premixed powder for thin and final coat plaster finish on wall and ceiling, or on plastering surface. It is a water-resistant plaster which can be used in dry and/or wet interior conditions. It is suitable for hand application on concrete, lightweight concrete, block work and rendered surfaces but not on painted surfaces. The surface can be further polished by ultra-fine sand paper to obtain an extra smooth surface

• Item Code: MARKCHEM_WALL_PUTTY
• Production Capacity: 2000 BAGS PER DAY
• Delivery Time: 2 BUSINESS DAYS
• Packaging Details: 20 KG HDPE SEALED VALVE BAG

MARKCURE WB 116 is a solvent free, membrane forming wax emulsion, suitable for spray application to freshly poured concrete. The resultant film retains sufficient moisture in the concrete to ensure full hydration of the cement; essential for optimum strength development. Membrane cured concrete is typically harder and exhibits a dust free surface with a reduced incidence of drying shrinkage cracks.

Features / Advantages:

• Eliminates the need for water
• Promotes a harder dust free surface
• Single Application
• Cured film is clear and water repellent
• Reduces drying shrinkage
• High curing efficiency
• High curing efficiency
• Nontoxic and Water Based

Typical Applications:

• More effective and economical alternative to hessian and water and polythene curing regimes. Suitable for use on all concrete surfaces.

Specification Complies:

• AASHTO M-148 Type 1 Class A
• ASTM C309 Type 1 Class A

Directions for Use:
Method for Usage:

• The compound should be spray applied as evenly as possible on to the freshly placed concrete.
• For horizontal surfaces MARKCURE WB 116 should be applied as soon as the initial surface sheen has disappeared from the concrete surface. In the case of formed concrete, the MARKCURE WB 116 should be applied immediately on removal of the formwork. To assist breakdown of the MARKCURE WB 116 film on vertical and formed surfaces, it is essential to dampen down the concrete with clean water prior to application.

Coverage:

• The recommended rate of application is 5-6 square meters per litre. This corresponds to that at which MARKCURE WB 116 has been tested, and at which it attains the claimed degree of curing efficiency. In favorable conditions such as shaded interior surfaces, adequate curing can be achieved with extended coverage rates.

Film Breakdown:

• The time for deterioration of the membrane is dependent on a number of variables, which include film thickness, degree of exposure to weathering, traffic, UV light, and the porosity of the substrate concrete.

Storage and Shelf Life:

• Store the material cool and dry place (250C. Temp). Shelf life is 6 months when materials are stored in unopened containers as per recommended storage conditions.

Precautions:

• As with all chemical products, care should be taken during use and storage to avoid contact with eyes, mouth, skin and foodstuffs. Treat splashes to eyes and skin immediately. If accidentally ingested, seek medical attention. Reseal containers after use. Use in well ventilated areas and avoid inhalation.

• Item Code: MARKCURE-WB-116
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Karnal, Haryana (India)
• Production Capacity: 50 KL Per Dat
• Delivery Time: 2 Business Days
• Packaging Details: Packed in HDPE Sealed Cans and Barrels