Adhesives, Repairs

SUPERSET IS100 is a ready mixed polymer modified cement based powder which is multi- purpose tile adhesive. It provides outstanding bonding of tiles with no vertical slip and long open time for porcelain tiles, ceramic tiles and natural stone at different temperatures. IS 100 requires only addition of water.

flexiset h40 is a grey, polymer modified, cement-based tile adhesive, suitable for fixing tiles & natural stones in interior situations. It can be used over cementitious & self leveling screeds.

features / advantages:

• single component ready to use mix bag
• contains special additives to obtain longer pot life, excellent adhesion and waterproof
• excellent adhesion properties, no slip observed on vertical applications
• suitable for fixing ceramic tiles for floor & walls
• good mechanical strength
• shrinkage cracks are eliminated due to its self curing properties
• floor can be made available for traffic after 24 hours

consumption:

• for a 3 mm bed thickness the coverage will be 4 -4. 5 kg/sqm

direction for use:
surface preparation:

• clean the substrate of oil stains and bond inhibiting compounds. Also remove dirt, dust and laitance, if any, using high pressure water jet or any other suitable method.
• ensure that the substrate is flat, stable, well adhered and has a normal absorption
• concrete screeds, plastered surfaces, block work and renders should be sufficiently cured to avoid shrinkage cracks
• correct the local undulations/damages at least 48 hours before the application
• saturate the surface well and remove excess water before application of the tile adhesive.

mixing:

• a 20 kg bag require approx. 5 -5. 5 liter of water. The adhesive is immediately ready for use and has a pot life of 3hrs at approx. 30oc temperature. After mixing leave the paste for 3 minutes to gets its maturity.

fixing:

• spread not more than 1sqm at a time and use notch towel for spreading- a layer of thickness in between (3mm to 5mm) should be applied between the tile and surface
• lay the tile over the adhesive and press it down to squash the groove formed.
• wipe for surplus paste from the tiles with damp cloth. Leave it minimum for 24hrs period before grouting the joints.

storage & shelf life:

• store the material in dry place. Store under cover, and protect it from moisture. Do not add excess of water
• shelf life is one year from the date of manufacturing when stored in undamaged, unopened, original sealed packaging.

health & safety:

• if it comes in contact with skin, mouth, eyes etc. , wash it with plenty of water & if needed take medical advice. If accidentally gets ingested seek immediate medical attention. It is nontoxic.
• do not reuse the containers for storage of consumable items for further information refers to the material safety data sheet. Msds available on demand.

 

• Item Code: FlexiSet-H-40-Grey
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: Karnal, Haryana (India)
• Production Capacity: 50 Tons Per Day
• Delivery Time: 2 Days
• Packaging Details: 20 Kg Bag

FLEXISET H40 is a White, polymer modified, cement-based tile adhesive, suitable for fixing tiles & natural stones in interior situations. It can be used over cementitious & self leveling screeds.

Features / Advantages:

• Single component ready to use mix bag
• Contains Special Additives to obtain longer pot life, excellent adhesion and waterproof
• Excellent adhesion properties, no slip observed on vertical applications
• Suitable for fixing ceramic tiles for floor & walls
• Good Mechanical Strength
• Shrinkage cracks are eliminated due to its self curing properties
• Floor can be made available for traffic after 24 hours

Consumption:

• For a 3 mm bed thickness the coverage will be 4 4.5 kg/sqm

Complies:

• IS 15477: Type 2 Adhesive
• EN & ISO Standards: C2TE S1

Direction for Use:
Surface Preparation:

• Clean the substrate of oil stains and bond inhibiting compounds. Also remove dirt, dust and laitance,if any, using high pressure water jet or any other suitable method.
• Ensure that the substrate is flat, stable, well adhered and has a normal absorption.
• Concrete screeds, plastered surfaces, block work and renders should be sufficiently cured toavoid shrinkage cracks.
• Correct the local undulations/damages at least 48 hours before the application.
• Saturate the surface well and remove excess water before application of the tile adhesive.

Mixing:

• A 20 kg bag require approx. 5 5.5 liter of water. The adhesive is immediately ready for use and has a potlife of 3hrs at approx. 30 o C temperature. After mixing leave the paste for 3 minutes to gets its maturity.

Fixing:

• Spread not more than 1sqm at a time and use notch towel for spreading
• A layer of thickness in between (3mm to 5mm) should be applied between the tile and surface
• Lay the tile over the adhesive and press it down to squash the groove formed.
• Wipe for surplus paste from the tiles with damp cloth. Leave it minimum for 24hrs period beforegrouting the joints.

Storage & Shelf Life:

• Store the material in dry place. Store under cover, and protect it from moisture. Do not add excess ofwater.
• Shelf life is one year from the date of manufacturing when stored in undamaged, unopened, original sealed packaging.

Health & Safety:

• If it comes in contact with skin, mouth, eyes etc., wash it with plenty of water & if needed take medical advice. If accidentally gets ingested seek immediate medical attention. It is nontoxic.
• Do not reuse the containers for storage of consumable items for further information refers to the material safety data sheet. MSDS available on demand.

• Item Code: FLEXISET-H40-WHITE
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Port of Dispatch: Karnal, Haryana (India)
• Production Capacity: 20 Tons Per Dayns Per Day
• Delivery Time: 1 Business Day
• Packaging Details: 20 Kg Sealed Bag

Being a quality-centric organization of this industry, we are engaged in providing a wide array of Block Fix Adhesive.

Description:

• Block Fix W560 is a ready to mix, self curing cementitious mortar for mounting and bonding aerated autoclaved concrete,hollow blocks and bricks. It is made from cement graded sand and polymeric additives which help in providing a mechanical bond as well as excellent adhesion between the blocks. Block fix W560 meets the requirements of national and international standards.

Features:

• Single component ready to use mix bag and easy to use
• Contains Special Additives for excellent adhesion and waterproof
• Due to longer pot life, larger quantity can be mixed
• Reduces time that required for mounting the block
• Best bond strength, compressive and tensile strength
• No curing required after block work
• Suitable for both interior and exterior surfaces

Consumption:

• For a 3 mm bed thickness the coverage will be 3.5 – 5 kg/sqm

Direction for Use:
Surface Preparation:

• Wet the block to be used for fixing
• Ensure that the surface for mounting must be thoroughly cleaned of all dust, oil and greases
• Ensure that surface is flat and free from voids, holes and cracks

Mixing:

• Gradually add 3 parts of powder to 1 part of water and mix it to smooth workable paste
• Allow the paste to stand for 3 minutes for its maturity. Do not add extra water
• Apply Block Fix W560 uniformly
• After first unit is placed apply Block Fix W560 on both sides with uniform thickness and continue mounting by checking line and level
• Firmly press the block for good initial bonding
• Excess material should be cleaned

Fixing:

• Apply BLOCKFIX W560 uniformly
• After =irst unit is placed apply BLOCKFIX W560 on both sides with uniform thickness and continue mounting by checking line and level.
• Firmly press the block for good initial bonding
• Excess material should be cleaned

Storage & Shelf Life:

• Store the material in dry place. Store under cover, and protect it from moisture. Do not add excess of water
• Shelf life is one year from the date of manufacturing when stored in undamaged, unopened, original sealed packaging.

Health & Safety:

• If it comes in contact with skin, mouth, eyes etc., wash it with plenty of water & if needed take medical advice. If accidentally gets ingested seek immediate medical attention. It is nontoxic.
• Do not reuse the containers for storage of consumable items for further information refers to the material safety data sheet. MSDS available on demand.

• Item Code: W-560